Surfaces In The Oven Cavity - Thermador Masterpiece MEDS301WS Use And Care Manual

Part Recommendations
Telescopic Rack Wash with soapy water. Rinse
thoroughly and dry, or gently rub
with cleansing powder or
soap-filled pads as directed.
Avoid getting cleansing powder
in the telescopic slides.
Re-lubrication may become
necessary. Use only
high-temperature food-grade
lubricants to re-lubricate slides.
DO NOT clean the rack in a
self-cleaning oven.
Telescopic Guides Hot soapy water:
Clean with a dish cloth.
Do not remove the lubricant
while the pull-out rails are pulled
out. It is best to clean them when
they are pushed in.
Do not place in dishwasher.
Water Tank Hot soapy water:
Clean with a dish cloth and rinse
thoroughly to remove residual
detergent.
Dry with a soft cloth. Leave to dry
with the cover open.
Do not place in dishwasher.
Silicone Door Gasket Clean with hot soapy water.
Glass Wash with soap and water or
glass cleaner. Use Fantastik® or
Formula 409® to remove grease
spatters and stubborn stains.
Glass Control Panel Use warm soapy water on a dish
cloth or glass cleaner sprayed
directly on a paper towel.
Painted Surfaces Clean with hot soapy water or
apply Fantastik® or Formula
409® to a clean sponge or
paper towel and wipe clean.
Avoid using powder cleaning
agents, steel wool pads and
oven cleaners.
Porcelain Surfaces Immediately wipe up acid spills
(bottom of oven like fruit juice, milk and tomatoes
cavity) with a dry cloth. Do not use a
moistened sponge/cloth on hot
porcelain. When cool, clean with
hot soapy water or apply
Bon-Ami® or Soft Scrub® to a
damp sponge. Rinse and dry.
For stubborn stains, use
soap-filled pads. It is normal for
porcelain to show fine lines with
age due to exposure to heat and
food soil.
Part Recommendations
Stainless Steel Always wipe or rub in the
Surfaces direction of the grain. Clean with
a soapy sponge, then rinse and
dry, or wipe with Fantastik® or
Formula 409® sprayed on a
paper towel. Protect and polish
with Stainless Steel Magic® and
a soft cloth. Remove water spots
with a cloth dampened with white
vinegar. Use Bar Keeper´s
Friend® to remove heat
discoloration.
Plastic & Controls When cool, clean with soapy
water, rinse and dry.
Probe Wipe with soapy water. Do not
submerge. Do not wash in the
dishwasher.
Printed areas (words Do not use abrasive cleaners or
& numbers) petroleum based solvents.
Notes
Slight differences in color on the front of the appliance
▯
are caused by the use of different materials, such as
glass, plastic and metal.
Shadows on the door panels, which look like streaks,
▯
are caused by reflections made by the interior lighting.
Enamel is baked on at very high temperatures. This
▯
can cause some slight color variation. This is normal
and does not affect operation.

Surfaces in the Oven Cavity

The slightly textured surface of the back wall, ceiling and
sides in the oven cavity consists of Ecolyse coating
material and should not be cleaned with harsh
chemicals.
The oven cavity bottom is enameled and has a smooth
surface.
Cleaning the oven is easier because there is no cleaning
around a coil element showing on the bottom of the
oven. The hidden lower element is protected from food
soils and spills. Wiping up excess spills is easy.
Cleaning Enamel Surfaces
Clean the smooth enamel surfaces with a dish cloth and
hot soapy water. Dry with a soft cloth.
Soften baked-on food residues with a damp cloth and
soapy water. If there are heavy food deposits use a
soap- filled pad.
Note: Food residues can leave a white coating behind.
These are harmless and do not affect performance. You
can remove these residues using lemon juice if required.
35