Initial Use; Calibrating The Appliance And Cleaning The Oven Cavity - Thermador Masterpiece MEDS301WS Use And Care Manual

Initial Use

As soon as the appliance is connected to the power
supply, the first setting "Time of day" appears on the
display.
Setting the time of day
Touch the bottom line.
1.
The time setting options are displayed.
Touch the "Hours" touch field and swipe to the left or
2.
right to select the current hour.
Touch the "Minutes" touch field and swipe to the left or
3.
right to select the current minute.
Touch the symbol to apply the settings.
8
4.
Setting the language
Touch the bottom line.
1.
Swipe to the left or right to select the required
2.
language.
Touch the top line.
3.
Setting the Clock Display
Touch "Clock display".
1.
Touch the bottom line.
2.
Swipe to the left or right to select "digital" or
3.
"analogue".
Touch the top line.
4.
Setting the water hardness
Touch "Water hardness".
1.
Touch the bottom line.
2.
Swipe to the left or right to select the appropriate water
3.
hardness.
Touch the top line.
4.
Setting up Home Connect
You can start the Home Connect assistant to connect to
the Home Connect network and pair your mobile device.
Touch "Home Connect".
1.
Touch "Start assistant".
2.
Follow the instructions in the chapter "Home
3.
Connect".~ "Home Connect" on page 30
Note: You can also activate this feature later in the
"Settings" menu.~ "Adjust Basic Settings" on page 16
Notes
You can change these settings at any time in the basic
▯
settings.
After connecting the appliance to the power or
▯
following a power failure, the settings for initial use are
shown in the display.
Calibrating the Appliance and Cleaning
the Oven Cavity
The boiling temperature of water depends on the altitude.
The oven needs to be calibrated in order to ensure
optimum performance after installation.
Preparing the Appliance for Calibration
Remove the accessories from the oven cavity.
1.
Remove any remaining packaging, such as
2.
polystyrene pellets, from the oven cavity.
Before calibrating the appliance, wipe the smooth
3.
surfaces in the oven cavity with a soft, wet cloth.
Calibration and Cleaning
Notes
The calibration can only be started when the oven
▯
cavity is cold (room temperature).
Do not open the appliance door during calibration as it
▯
will be interrupted.
NOTICE: ENAMEL DAMAGE! Do not start an operation if
water is on the bottom of the oven cavity. Let appliance
cool down and wipe the water from the oven cavity
bottom before starting an operation.
15