Chapter 2 Configuring and Upgrading the System
5.5.1 Installation
Follow the procedure below to install the DIMM.
1.
Shut down OS.
The sever turns off automatically.
2.
Disconnect the power cords from the outlets.
3.
Remove the CPU/IO module by referring to 5.4.1 Removal in this Chapter.
4.
Remove three screws (two on the front and one on the rear), and remove the top cover of the
CPU/IO module.
5.
Remove the air duct.
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Maintenance Guide (VMware)
5. Installing and Replacing Optional Devices
Air duct
127