Miscellaneous - NEC EXP320R Maintenance Manual

Chapter 3 Useful Features

2.4.6 Miscellaneous

The Miscellaneous menu appears when you select Miscellaneous on BMC Configuration menu.
Item
Miscellaneous
Behavior when SEL
repository is Full
Platform Event Filter
Management Software
ESMPRO Management
Authentication Key
Redirection
*1: When this item is changed to/from "Overwrite oldest SEL", all log records in the SEL Repository are cleared.
*2: However, even if you specify this setting, in the case that the OS is started and ft control software detects SEL
area is filled fully, all SEL are deleted and new SEL is recorded again.
In addition, the contents of SEL is recorded to log of OS by ft control software, so back up the log as needed
according to your operation form.
*3: Disabling Platform Event Filter also disables SNMP alert.
*4: When BMC can be managed directly from NEC ESMPRO Manager (Ver.5.4 or later), this item must be set to
"Enable". If it is set to "Enable", Authentication Key is required.
*5: Can be specified only when ESMPRO Management is set to "Enable".
*6: This Authentication key is used when NEC ESMPRO Manager (Ver.5.4 or later) manages the target server. Up
to 16 alphanumeric characters are accepted.
*7: If Redirection is set to "Enable", Console Redirection Configuration port in BIOS is set to "Serial Port B" at next
boot.
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Maintenance Guide (VMware)
Specify the behavior when SEL repository is full.
Stop logging SEL
: SEL is not recorded any more.
Clear all SEL
: Delete all SEL and record SEL newly.
Overwrite oldest SEL
: Old SEL is overwritten with new SEL.
Enable or disable Platform Event Filter.
Setting for remote management
Enable or disable NEC ESMPRO Management.
Specify the Authentication Key.
Enable or disable Redirection feature.
Note
If you do not use remote management feature by NEC ESMPRO, set to "Disable" for
ESMPRO Management in Management Software. In this case, setting for relevant items
are hidden and unnecessary.
Description
*1
*2
*3
*4
*5 *6
*5 *7
2. BMC Configuration
Default Value
Stop logging SEL
Enable
–
Current set value
Guest
Enable
195