Sae Fastener Torque Chart - Kioti KL701 Manual

12-2 KL701
TORQUE TIGHTENING CHART 1
Note : Use these torques, unless special torques are specified. Values are for UNC and UNF thread fasteners, plated or unplated
as received from supplier. Fasteners can be dry or lubricated with normal engine oil.
Values do not apply if graphite, moly-disulphide or other extreme pressure lubricant is used.
SAE Grade
Bolt head identification
(See note 1)
Bolt Size
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1 1/8
1 1/4
1 3/8
1 1/2
Note : Bolt head identification marks as per grade. Manufacturing marks will vary. * Thick nuts must be used with Grade 8 bolts.
KL701-AU-12.indd 2

SAE FASTENER TORQUE CHART

2
LB FT
Min. Max. Min. Max.
5 6 7 8
10 12 14 16
20 23 27 31
30 35 41 47
45 52 61 70
65 75 88 102
95 105 129 142
150 185 203 251
160 200 217 271
250 300 339 406
5
LB FT
Min. Max. Min. Max.
9 11 12 15
17 20.5 23 28
35 42 48 57
54 64 73 87
80 96 109 130
110 132 149 179
150 180 203 244
270 324 366 439
400 480 542 651
580 696 787 944
800 880 1085 1193
1120 1240 1519 1681
1460 1680 1980 2278
1940 2200 2631 2983
8 ★
LB FT
Min. Max. Min. Max.
12 15 16 20
24 29 33 39
45 54 61 73
70 84 95 114
110 132 149 179
160 192 217 260
220 264 298 358
380 456 515 618
600 720 814 976
900 1080 1220 1464
1280 1440 1736 1953
1820 2000 2468 2712
2380 2720 3227 3688
3160 3560 4285 4827
2013-03-29 오전 11:29:15