Table of Contents
Advertisement
1
7.13 Drum motor (1)
Unhook the belt tensioner springs (2). This releases the belt tension
pulley (3) which is attached to the motor.
Rotate the motor t face the interior of the device. The belt (4) is then
free and can be removed.
Release the screws (S) fastening the front and rear mounting
brackets (5) of the motor, angle the brackets upwards, and remove
them.
The motor unit can then be accessed.
The motor and its bearings can easily be removed.
7.14 NTC (1)
The NTC (1) is seated in a special
receptacle on the dryer cartridge (3)
between the liquefier and the
evaporator in the heat pump circuit.
A special spring (2) serves to keep
the component securely seated.
To replace it, the spring (see dia-
gram) is pressed and is released
downwards.
The NTC can then be removed
upwards.
1
06.2005 R.Kurzke
2
3
2
1
2
- 21 -
4
3
S
S
5
1
599 522 797 EN
Hide quick links:
Advertisement
Table of Contents
