Table of Contents
Advertisement
5.5 Canister filling pump
The pump is actioned by a synchronous motor with a power of about
17W.
The function of the motor is to pump the condensation water from the
sump to the canister. The pump, too, is powered by a triac.
The resistance of the stator winding is approximately 750 Ohm
5.6 Process blower / fan
The fan for transporting the air is screwed in in the rear air channel.
The fan motor is also fed through a triac.
Power consumption 150 W
2450 rpm
Fan motor condenser 5µF
5.7
Terminal block with incorporated suppressor
The suppressor, which is incorporated in the terminal block, prevents
radio dicturbance generated by the dryer from entering the power lines.
This device functions correctly only if the appliance is grounded.
Checking for efficiency:
Use a tester to measure the resistance across the following terminals:
06.2005 R.Kurzke
599 522 797 EN
- 12 -
Hide quick links:
Advertisement
Table of Contents
