Mbm-Xem-002 10-Gigabit Ethernet Module Led Descriptions; Table A-4. Mbm-Xem-002 10-Gigabit Ethernet Switch Led Indicators - Supermicro SuperBlade MBM-XEM-002 User Manual

8U/4U SuperBlade Network System Options User's Manual
A-4 MBM-XEM-002 10-Gigabit Ethernet Module LED
Descriptions
MBM-XEM-002 10-Gigabit Ethernet module LEDs are described below in

Table A-4. MBM-XEM-002 10-Gigabit Ethernet Switch LED Indicators

LED State
Module Initiation
Steady On
OK LED
Module Fault LED
Steady On
(Red)
Solid Green
Link/Activity
Ethernet Port Blinking Green
Status LED
Off
Amber
Speed Ethernet
Green
Port Status LED
Off
Description
The MBM-XEM-002 switch module is operational and has
passed the POST (Power-On Self-Test) with no critical faults.
When lit, this LED indicates that the MBM-XEM-002 switch
module has either failed the POST or has detected an
operational fault within the module. When this LED is lit, the
fault LED on the blade enclosure will also turn on.
This indicates that the link is established, no activity
This indicates that data is being transmitted (Tx) or received
(Rx)
This indicates that no link is established
Connection speed of the port is 10-Gb/sec
Connection speed of the port is 1-Gb/sec
Connection speed of the port is 100-Mb/sec
A-4
Table A-4.