Wlan Module - HP 280 G3 Maintenance And Service Manual

WLAN module

The WLAN module is located under the drive cage.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Remove the optical drive
5. Remove the drive cage
6. Disconnect the antenna cable from the module (1).
7. Remove the Phillips M2.0×3.0 screw (2), and then pull the module out of the socket (3).
To install the WLAN module, reverse the removal procedures.
26 Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 21).
(Optical drive on page 23).
(Hard drive on page 25).
16).
15).