Recovering The Configuration Settings - HP 280 G3 Maintenance And Service Manual

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command with the
Computer Setup (F10) Utility before Restore is needed. (See
Computer Setup—File table.)
NOTE: It is recommended that you save any modified computer configuration settings to a USB flash media
device and save the device for possible future use.
To restore the configuration, insert the USB flash media device with the saved configuration and perform the
Restore from Removable Media command with the Computer Setup (F10) Utility. (See
on page 42 in the Computer Setup—File table.)
● Hyper-Threading (enable/disable). Default is enabled.
● NIC PXE Option ROM Download (enable/disable). Default is enabled.
Computer Setup—File on page 42
Recovering the Configuration Settings
in the
Computer Setup—File
47