Download  Print this page

Advertisement

Processor

Description
Intel Core i7 8700 (3.2-GHz, 12-MB L3 cache), 65W
Intel Core i5 8500 (3.0-GHz, 9-MB L3 cache), 65W
Intel Core i5 8400 (2.8-GHz, 9-MB L3 cache), 65W
Intel Core i3 8011 (3.6-GHz, 6-MB L3 cache), 65W
Intel Pentium G5400 (3.7-GHz, 4-MB L3 cache), 65W
Intel Celeron G4900 (3.1-GHz, 2-MB L3 cache), 65W
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the fan duct
4.
Remove the fan sink
5.
Rotate the locking lever to its full open position (1).
6.
Raise and rotate the microprocessor retainer to its fully open position (2).
7.
Carefully lift the processor from the socket (3).
CAUTION:
them could cause irreparable damage. Once pins are damaged it may be necessary to replace the
system board.
To install a processor, reverse the removal procedure.
NOTE:
After installing a new processor onto the system board, always update the system ROM to ensure
that the latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the
Web at: http://www8.hp.com/us/en/support-drivers.html.
34
Chapter 4 Removal and replacement procedures
(Access panel on page
(Fan duct on page
(Fan sink on page
Do NOT handle the pins in the processor socket. These pins are very fragile and handling
(Preparation for disassembly on page
16).
32).
33).
15).

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: