Download  Print this page

Solid-state Drive Module - HP 280 G3 Maintenance And Service Manual

Small form factor business pc.
Hide thumbs

Advertisement

Solid-state drive module

The M.2 solid-state drive module is located under the drive cage.
Solid-state drives, M.2
256-GB, PCIe
128-GB, PCIe
128-GB, SATA-3
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Remove the optical drive
5.
Remove the drive cage
6.
Remove the Phillips M2.0×3.0 screw (1), and then pull the module out of the socket (2).
To install the solid-state drive module, reverse the removal procedures.
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page
21).
(Optical drive on page
(Hard drive on page
25).
16).
23).
15).
Solid-state drive module
27

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: