Save Your Data; Use Multiples Usb Stick - ANDILOG CENTOR TOUCH STAR Operating Manual

Once the DATASTICK communication is active, a USB icon appears on the main Measure screen:
The USB stick supplied by ANDILOG at the time of the purchase of the DATASTICK option, has been
set to communicate with your CENTOR TOUCH; and it recognize the serial number of your CENTOR
TOUCH. However you can duplicate this USB sticks as many as you want. To do so: copy and paste
the file "datastick config" (saved on the original USB stick) on your own USB stick.
c. Save your data
Save you data on the USB by pushing on the icon:
During the data transfer, the USB icon becomes a timer; do
not disconnect the USB stick at this time. Once the timer
disappears you can safely disconnect the USB stick.
On the left bottom corner, the button
directly to the « Stick » setttings screen.
d.

Use multiples USB stick

CENTOR TOUCH Force Gauge – STAR / DUAL version
- 26 -
Instructions Manual – V6.10
allows to access