ANDILOG CENTOR TOUCH STAR Operating Manual page 26

All those files are saved as TXT format, and so can be open with regular Table software as Microsoft
Excel. Data are separated by a TAB character (09 decimal and 09 hexadecimal) and the rows are
separated by a carriage return (decimal 13, hex 0D).
Changing a name is done by pressin the corresponding button, which display a virtual keyboard:
3. The button is used to eject safely the USB Datastick.
4. You can choose to save your data on the Datastick either:

Manually (at the end of each test by pressing the

Automattically at the end of each test

After confirmation at the end of each test
5. The button including the sign # and followed by a number, allows you to change the automatic
counter, the number displayed corresponds to the conter's current value.
CENTOR TOUCH Force Gauge – STAR / DUAL version
The "1,2,3,..." button allows to insert an automatic counter to the
name of the directory curve. This counter is symbolized by the #
sign.
- 25 -
Instructions Manual – V6.10
button)