Table of Contents
Advertisement
5.
Wire the customer-supplied circuit to the terminal block on the option according to
Figure
15. Refer to
Table 5
for a detailed description of the option terminal functions.
Figure 15
Preparing wire ends:
Pull back the shielding and lightly
twist the end with fingers, keeping
the ends from fraying.
YASKAWA ELECTRIC TOBP C730600 79C YASKAWA AC Drive Option AO-A3 Installation Manual
Figure 17
for the AO-A3 Option connection diagram. Refer to
Screwdriver blade size
about 5.5 mm (7/32")
When not using
crimped insulated
sleeves
Loosen the screws and
insert the wire into the
opening on the terminal block.
Wire crimping ferrule terminals
or not soldered ends
Figure 15 Connect Cable Wiring
5 Installation Procedure
Blade depth of
0.4 mm or less
Blade width of
2.5 mm or less
AO
Option terminal block
25
Advertisement
Table of Contents
