YASKAWA AO-A3 User & Installation Manual page 24

5 Installation Procedure
3.
Insert the option card (B) into the CN5-A (G), CN5-B (H) and CN5-C (I) connector
on the drive and fasten it into place using the included screws (C). Tighten both
screws to 0.5 to 0.6 Nm (4.4 to 5.3 in. lbs).
Figure 13
I
H
G
Note: Installing the option card on a GA700, CR700, and CH700 drive requires only two screws and
does not require a ground wire. The option package ships with three screws and ground wires for
installation on other product series. Do not use the ground wire or the extra screw.
4.
Prepare the wire ends as shown in
Figure 14
24
Figure 13 Insert the Option Card
Option terminal
FE
Figure 14 Prepare Ends of Shielded Cable
YASKAWA ELECTRIC TOBP C730600 79C YASKAWA AC Drive Option AO-A3 Installation Manual
AO
A
B
C
Figure 14.
Insulation
To customer
circuit
Shield sheath
(Insulate with electrical tape
or heat-shrink tubing)
AO