Relative
Humidity
Vibration
Shock
Certification
EMC
Safety
1.3 Checking the Delivery Package
1.3.1 Procedure
1.
When accepting a delivery, please check the packaging for visible transport damage.
2.
If any transport damage is present at the time of delivery, lodge a complaint at the shipping
company in charge. Have the shipper confirm the transport damage.
3.
Unpack the device at its installation location.
4.
Keep the original packaging in case you have to transport the unit again.
NOTICE!
Damage to the device during transport and storage!
If a device is transported or stored without packaging, shocks, vibrations, pressure and
moisture may impact the unprotected unit. A damaged packaging indicates that ambient
conditions have already had a massive impact on the device.
The device may be damaged.
Do not dispose of the original packaging. Pack the device during transportation and
storage.
1.3.2 Packing Contents
Before setting up the system, please check the contents of the packaging and any accessories you may
have ordered for completeness and damage. If the contents of the packaging are incomplete,
damaged or do not match your order, inform the responsible delivery service or contact your dealer
immediately.
▪
CCD x 1
▪
40W/19V Adaptor x 1
▪
3-pin power cord
0 ~ 90%@40°C (non-condensing)
IEC 60068-2-64, random, 5Grms 5-500Hz, 1Oct./min, 1hr/axis
IEC 60068-2-27, half sine, 50G, 11ms
CE/FCC Class B
CB
- 4 -