Avalue Technology CCD-07W01 User Manual page 31

Parameter
Supervisor Password
User Password
Set Supervisor Password
Set User Password
The following Setup parameters are visible if "Supervisor Password" is set (Installed).
Power On Password
Option Meaning
Not Installed The general password is set (Installed) or not set (Not Installed).
Enter Password
Not Installed The user password is set (Installed) or not set (Not Installed).
Enter Password
NA Set supervisor password for full access to the BIOS Setup. A
password prompt appears before the BIOS is opened. This field
opens the password input dialog. This can be changed by new
entry after correct input of the supervisor password.
If you input an empty password (only <Enter> key), the set
password is deleted and the password prompt disabled.
NA Set a user password to restrict access to the BIOS Setup. A
password prompt appears before the BIOS is opened.
This field opens the password input dialog. This can be changed by
new entry after correct input of the user password.
If you input an empty password (only <Enter> key), the set
password is deleted and the password prompt disabled.
Enabled The password prompt appears either during booting in the
- 25 -