Fluke Thermalert 4.0 User Manual page 50

®
Thermalert 4.0 Series
Users Manual, Rev. 1.1, May 2018
If you cut the cable to shorten it, notice that both sets of twisted-pair wires have drain wires inside their
insulation. These drain wires (and the white wire that is not part of the twisted pair) must be connected to the
If you purchase your own cable, use wire with the same specifications as herein mentioned. Maximum
RS485 cable length is 1.200 m (4000 ft). Power supply feed in distance to the Thermalert 4.0 sensor should
52
1.800.561.8187
Risk of Personal Injury
Teflon develops poisonous gasses when it is exposed to flames!
An ordered cable does not include a terminal block!
not extend the 60 m (200 ft) limit.
www.
Note
Note
terminal labeled CLEAR.
Note
.com
information@itm.com