Step 3
The cable gland consists of a PG nut (1), a relief bushing (2)
and a metal cone ring (3).
Step 4
Put the following on the cable: the PG nut (1) and the relief
bushing (2).
Step 5
Prepare the cable. Remove about 6 cm (2.36 in) of the
insulation.
Shorten the shield to about 1 cm (0.4 in).
Tin-coat the connecting leads if not done yet.
Step 6
Feed the prepared cable with the metal cone ring.
1.800.561.8187
www.
.com
(1)
(2)
(3)
(1)
(2)
information@itm.com
Installation
5
Model 2-Wire
31