General Safety Instructions And Information On Use; Terminology; Designated Use; Misuse - BONFIGLIOLI Agile Applications Manual

2 General safety instructions and information on use

This chapter contains general safety instructions for the Operator and the Operating Staff. At the be-
ginning of certain main chapters, some safety instructions are included which apply to all work described
in the relevant chapter. Special work-specific safety instructions are provided before each safety-rele-
vant work step.

2.1 Terminology

According to the documentation, different activities must be performed by certain persons with certain
qualifications.
The groups of persons with the required qualification are defined as follows:
Operator
This is the entrepreneur/company who/which operates the frequency inverter and uses it as per the
specifications or has it operated by qualified and instructed staff.
Operating staff
The term Operating Staff covers persons instructed by the Operator of the frequency inverter and as-
signed the task of operating the frequency inverter.
Skilled Personnel
The term Skilled Personnel covers staff that are assigned special tasks by the Operator of the frequency
inverter, e.g. installation, maintenance and service/repair and troubleshooting. Based on their qualifica-
tion and/or know-how, Skilled Personnel must be capable of identifying defects and assessing functions.
Qualified electrician
The term Qualified Electrician covers qualified and trained staff who has special technical know-how
and experience with electrical installations. In addition, Qualified Electricians must be familiar with the
applicable standards and regulations, they must be able to assess the assigned tasks properly and
identify and eliminate potential hazards.
Instructed person
The term Instructed Person covers staff who was instructed and trained about/in the assigned tasks
and the potential hazards that might result from inappropriate behavior. In addition, instructed persons
must have been instructed in the required protection provisions, protective measures, the applicable
directives, accident prevention regulations as well as the operating conditions and verified their qualifi-
cation.
Expert
The term Expert covers qualified and trained staff who has special technical know-how and experience
relating to frequency inverter. Experts must be familiar with the applicable government work safety
directives, accident prevention regulations, guidelines and generally accepted rules of technology in
order to assess the operationally safe condition of the frequency inverter.

2.2 Designated use

The frequency inverter is designed according to the state of the art and recognized safety regulations.
The frequency inverters are electrical drive components intended for installation in industrial plants or
machines. Commissioning and start of operation is not allowed until it has been verified that the machine
meets the requirements of the EC Machinery Directive 2006/42/EC and DIN EN 60204-1.
The frequency inverters meet the requirements of the low voltage directive 2014/35/EU and DIN
EN 61800-5-1. CE-labelling is based on these standards. Responsibility for compliance with the EMC
Directive 2014/30/EU lies with the operator. Frequency inverters are only available at specialized dealers
and are exclusively intended for commercial use as per EN 61000-3-2.
No capacitive loads may be connected to the frequency inverter.
The technical data, connection specifications and information on ambient conditions are indicated on
the rating plate and in the documentation and must be complied with in any case.

2.3 Misuse

Any use other than that described in "Designated use" shall not be permissible and shall be considered
as misuse.
03/18 AGL-STOV0-01SV0-06 7