Ear Protectors; Organizational Measures; General; Use In Combination With Third-Party Products - BONFIGLIOLI Agile Applications Manual

 Only use the frequency inverter if the rated connection and setup values specified by the manu-
facturer are met.
 Provide appropriate tools as may be required for performing all work on the frequency inverter
properly.

2.8.3 Ear protectors

 The frequency inverter produces noise. Due to noise development, frequency inverters should
only be installed in normally unstaffed areas.
 Noise emission in operation is < 85 dB(A) in the case of sizes 1 through 7.
 Noise emission in operation is approx. 86 dB(A) in the case of size 8. Ear protectors must be used
when staying near the frequency inverter.

2.9 Organizational measures

2.9.1 General

 Train your staff in the handling and use of the frequency inverter and the machine/plant as well
as the risks involved.
 Use of any individual parts or components of the frequency inverter in other parts of the opera-
tor's machine/plant is prohibited.
 Optional components for the frequency inverter must be used in accordance with their designated
use and in compliance with the relevant documentation.

2.9.2 Use in combination with third-party products


Please note that Bonfiglioli Vectron GmbH will not accept any responsibility for compatibility with
third-party products (e.g. motors, cables or filters).
 In order to enable optimum system compatibility Bonfiglioli Vectron GmbH offers components fa-
cilitating commissioning and providing optimum synchronization of the machine/plant parts in op-
eration.
 If you use the frequency inverter in combination with third-party products, you do so at your own
risk.

2.9.3 Handling and installation

 Do not commission any damaged or destroyed components.
 Prevent any mechanical overloading of the frequency inverter. Do not bend any components and
never change the isolation distances.

Do not touch any electronic construction elements and contacts. The frequency inverter is
equipped with components which are sensitive to electrostatic energy and can be damaged if han-
dled improperly. Any use of damaged or destroyed components will endanger the machine/plant
safety and shall be considered as non-compliance with the applicable standards.
 Only install the frequency inverter in a suitable operating environment. The frequency inverter is
exclusively designed for installation in industrial environments.
 If seals are removed from the case, this can result in the warranty becoming null and void.

2.9.4 Electrical connections

 The five safety rules must be complied with.
 Never touch live terminals. In sizes 1 through 7, the DC-link may have dangerous voltage levels
up to 3 minutes after shutdown. In size 8, the DC-link may have dangerous voltage levels up to
10 minutes after shutdown.
 When performing any work on/with the frequency inverter, always comply with the applicable na-
tional and international regulations/laws on work on electrical equipment/plants of the country in
which the frequency inverter is used.
 The cables connected to the frequency inverters may not be subjected to high-voltage insulation
tests unless appropriate circuitry measures are taken before.
 Only connect the frequency inverter to suitable supply mains. The frequency inverter may be op-
erated in TN, TT and IT grid types. Precautions must be taken for operation in IT grids, see Chap-
ter 7 "Electrical installation". Operation in a corner-grounded TN grid shall not be permissible.
The five safety rules
When working on/in electrical plants, always follow the five safety rules:
1 Disconnect
2 Secure to prevent restarting
3 check for absence of voltage,
03/18 AGL-STOV0-01SV0-06 11