Obligation; Copyright; Storage; General Safety Instructions And Information On Use - BONFIGLIOLI Active Cube Series Complement To Operating Instructions

Furthermore, Bonfiglioli Vectron MDS GmbH excludes any warranty/liability claims for any personal
and/or material damage if such damage is due to one or more of the following causes:
 inappropriate use of the device,
 non-compliance with the instructions, warnings and prohibitions contained in the documentation,
 unauthorized modifications of the device,
 insufficient monitoring of parts of the machine/plant which are subject to wear,
 repair work at the machine/plant not carried out properly or in time,
 catastrophes by external impact and force majeure.
1.3

Obligation

The Operating Instructions and this additional information must be read before commissioning liquid-
cooled devices and complied with. Anybody entrusted with tasks in connection with the
 transport,
 assembly,
 installation and
 operation
of the device must have read and understood the Operating Instructions and additional information on
liquid cooling, and especially the safety instructions. In this way, personal and material damage/losses
can be avoided.
1.4

Copyright

In accordance with applicable law against unfair competition, this document is a certificate. Any copy-
rights relating to it shall remain with
Bonfiglioli Vectron MDS GmbH
Europark Fichtenhain B6
47807 Krefeld
Deutschland
This document is intended for the operator of the device. Any disclosure or copying of this document,
exploitation and communication of its contents (as hardcopy or electronically) shall be forbidden, unless
permitted expressly.
Any non-compliance will constitute an offense against the copyright law dated 09 September 1965, the
law against unfair competition and the Civil Code and may result in claims for damages. All rights relating
to patent, utility model or design registration reserved.
1.5

Storage

The documentation forms an integral part of the device. It must be stored such that it is accessible to
operating staff at all times. If the device is sold on to other users, then the documentation must also be
handed over.

2 General safety instructions and information on use

The chapter 2 "General safety instructions and information on use" contains general safety instructions
for the Operator and the Operating Staff. At the beginning of certain main chapters, some safety in-
structions are included which apply to all work described in the relevant chapter. Special work-specific
safety instructions are provided before each safety-relevant work step.
2.1

Designated use

The frequency inverter is designed according to the state of the art and recognized safety regulations.
The frequency inverters are electrical drive components intended for installation in industrial plants or
machines. Commissioning and start of operation is not allowed until it has been verified that the machine
meets the requirements of the EC Machinery Directive 2006/42/EC and DIN EN 60204-1.
6 Liquid Cooling ACU / ANG /AEC 11/17