BONFIGLIOLI Agile Applications Manual page 38

 Emergency stop devices meet the following classifications:
- PL d (or smaller) according to EN ISO 13849-1
- Category 3 (or smaller) according to EN ISO 13849-1
- SIL 2 (or smaller) according to IEC 61508
 Emergency Stop devices have a cross fault monitoring (2-channel connection) or protected
wiring?
 It is ensured that resetting of the safety control device alone does not result in a restart of the
drive.
 It is ensured that no voltage higher than DC 30 V can occur on the terminals of the control
electronic unit (voltage resistance)

The protection against unexpected restart is set up.
Commissioning:
 Functional check of safety function performed?
 Wiring of safety components checked?
 Acceptance report issued?
Operation:
 The machine must be operated only inside the specified limits.
 The safety function is checked regularly.
38 AGL-STOV0-01SV0-06 03/18