Printing On Both Sides Of Sheets - Ricoh SP 203SF Manual

3. Printing Documents
3. When setting changes are completed, click [OK].
4. Print the document using the print function in the document's native application.
• If a paper jam occurs, printing stops halfway. Open the front cover, remove the print
MF
cartridge, and then remove the jammed paper. If the paper cannot be removed in this way, remove
it by opening the fusing cover. Printing will resume automatically once the cover is closed.
• If a paper jam occurs, printing stops halfway. Open the front cover, remove the print cartridge,
P
and then remove the jammed paper. If the paper cannot be removed in this way, remove it by
opening the fusing cover. Printing will resume automatically once the cover is closed.

Printing on Both Sides of Sheets

• This function cannot be available with the bypass tray.
1. After creating a document, open the [Printing Preferences] dialog box in the document's
native application.
2. On the [Setup] tab, in the [Duplex:] list box, select how you want to open the bound
output.
3. After making any additional settings, click [OK].
4. Start printing.
The machine prints only the one sides of pages first, and then displays on Smart Organizing
Monitor screen a message to reload the outputs turned over.
5. Take out all of the prints from the output tray and place them in Tray 1.
To print on the reverse side of the prints, turn them over so that the blank side faces down and
place them in Tray 1.
Portrait
ctt009.pdf (alt="Illustration of both sides of
66
sheets" title="")
CTT009
opal-p1_mf1_wi-fi_user_guide_gb_00104824_eng.xml
Draft 2013/03/07