Specifying Reduce/Enlarge - Ricoh SP 203SF Manual

Specifying Reduce/Enlarge

FiO
1. Press the [Copy] key.
ctt124.pdf (alt="Copy key
2. Press the [
standby mode screen to select [Reduce/Enlarge], and then press the [OK] key.
3. Press the [
select the ratio, and then press the [OK] key.
If [Zoom: 25-400%] has been selected, enter the ratio using the number keys, and then press the
[OK] key.
4. Press the [
• To apply the specified setting to all jobs, specify [Reduce/Enlarge] in [Copier Features].
Specifying Reduce/Enlarge
TiO
Use this procedure to specify the reduction or enlargement ratio for the current job from Smart
Organizing Monitor.
The procedure in this section is an example based on Windows 7. The actual procedure may vary
depending on the operating system you are using.
1. On the [Start] menu, click [All Programs].
2. Click [Smart Organizing Monitor for SP xxx Series].
3. Click [Smart Organizing Monitor for SP xxx Series Status].
4. If the machine you are using is not selected, click [Select Device...], and then select the
machine's model.
5. Click [OK].
6. On the [User Tool] tab, click [Printer Configuration].
opal-p1_mf1_wi-fi_user_guide_gb_00104830_eng.xml
illustration" title="")
(alt="Down arrow key"
(alt="Down arrow key"
(alt="Left arrow key" title="")] key to return to the initial screen.
CTT124
title="")] or [ (alt="Up arrow
title="")] or [ (alt="Up arrow
Making Enlarged or Reduced Copies
key" title="")] key in the
key" title="")] key to
Draft 2013/03/07
79