8.3.1
Connecting the power supply
A
Power supply
Fig. 8-11:
Connection assignment on the terminal strip
th
September, 4
2018
3 Connect ¾" sealing fitting with 20 wires of size AWG 18 (per-
mitted, max. 20; Killark type ENY-2TM) and ½" cable gland
with 11 wires of size AWG 18 (permitted, max. 11; Killark type
ENY-1TM).
All connections are routed to the outside and can be con-
nected and used.
Not used cables need to be isolated or connected to any unused
free terminals.
1 Connect the power supply to the terminals 24 VDC (A).
Figure 8-16 on page 94
Ultrasonic Flowmeter USM GT400
8 Installation
89