NAVI D-25 Instruction Manual page 93

3 Functions
3.4 Setting modes
82
Carrying out auto data storage
1.
Press the
Measurement mode.
2.
Press the ▲ key.
Automatic data storage will commence.
The first data is recorded when the preset time has
reached the preset starting time.
Do not turn the power ON/OFF during automatic data
storage. The reliability of stored data may be
compromised depending on when the ON/OFF key was
pressed.
3.
Press the CAL key.
Automatic data storage will end.
MEAS key to return to the
HORIBA