NAVI D-25 Instruction Manual page 138

D-52/53/54/55
4.5 Communication example using the HyperTerminal
[File] > [Properties] > [Settings] > [ASCII Setup]
You can check
HyperTerminal by enabling the "Echo typed characters
locally (E)" option.
5.
Command input
If a command is input, the corresponding response
data is sent back.
Command input should be completed within 10
seconds.
Be sure to first set the meter to the On-line mode
using the On-line/Off-line command.
®
Windows is a registered trademark of Microsoft
Corporation.
4 RS-232C communications
the contents transmitted via
127