3 Functions
3.1 Data memory function
● Calling up memory data
66
Data cannot be stored unless the value has stabilized or
in the CAL mode.
When the data is stored, an ID number for that specific
measurement can be registered (see "3.4.7 Sample ID#
setting" page 84).
1.
Press the ▼ key in the Measurement mode to
load measurement data.
Data
Measurement item
memory
No.
Calibration
point
Select and load the desired memory data item using
the ▲ and ▼ keys. The displayed number returns
to 0 after 300, the maximum number.
Displayed: Manual data memory
Blinking: auto data memory
Sample temperature
Measurement mode
: Auto HOLD measurement
None: Instantaneous value
HORIBA