NAVI D-25 Instruction Manual page 216

● D-54 basic operation flow
*1) pH Measurement (CH1) mode
(instantaneous value)
*4) mV Measurement (CH1) mode
(instantaneous value)
*8) Conductivity Measurement (CH2) mode
(instantaneous value)
*4)mV Measurement (CH2) mode
(instantaneous value)
To pH Measurement (CH1) mode
Setting mode
D-52/53/54/55
*2) Auto Hold Measurement
Clear Hold
*5) Auto Hold Measurement
Clear Hold
*9) Auto Hold Measurement
Clear Hold
Clock display
*1)
*1),*2)
*4), *5)
*6), *7)
*8), *9)
*3)
7.8 Operation flowcharts
*3) Calibration mode (instantaneous value)
Auto Hold calibration
Automatic release of Hold
*6) Relative mV Measurement mode
*7) Auto Hold Measurement
Clear Hold
Cell constant setting
Conductivity One-point Calibration mode
*6)Relative mV Measurement mode
Clock setting
Calibration history display
Data storage
Memory call-up
Repeatability check
7 Reference
205