NAVI D-25 Instruction Manual page 105

3 Functions
3.4 Setting modes
● Automatic power-off setting [item No. 03]
Item No. 03
94
This turns the Automatic Power-off function ON/OFF and
sets the time until the power is turned off.
When the Automatic Power-off function is set to ON, the
power to the meter automatically turns off if the keys are
not operated for the set amount of time.
1.
Press the ENTER key to toggle between ON
and OFF.
When set to ON, set the time for the power to be
turned OFF using the ▲ and ▼ keys.
Setting range: 1 to 30 minutes
2.
Use the MODE key to proceed to pH/ION CH
setting (item No. 04).
HINT!
Entering the Maintenance mode
Measure-
Maintenance mode
ment mode
Item No.
selection
HORIBA