NAVI D-25 Instruction Manual page 103

3 Functions
3.4 Setting modes
● Battery voltage check [item No. 01]
92
The battery voltage (V) is displayed.
Item No. 01
The battery voltage alarm is set at approximately 2.2 V.
The measured voltage for batteries depends on the
current. The voltage shown in this mode will be a little
lower than the actual voltage.
1.
Use the MODE key to proceed to temperature
zero adjustment (item No. 02).
HINT!
Entering the Maintenance mode
Measure-
Maintenance mode
ment mode
Battery
Item No.
selection
HORIBA