NAVI D-25 Instruction Manual page 51

2 Taking Measurements
2.7 Ion measurement (D-53)
● Electrode preparation
● Entering the ION Measurement mode
40
Refer to the electrode instruction manual and make sure
you have the correct electrode.
Chemical solution
Toxic substances may be used in some
ION electrodes. Use caution when
handling them. If the internal solution in
the electrode comes in contact with your
hands or skin, wash immediately with
Caution
water. If the internal solution comes in
contact with your eyes, flush
immediately with large amounts of water
and seek treatment by a physician.
1.
Press the MODE key in the pH Instantaneous
Value Measurement mode to enter the ION
Measurement mode.
The ION Instantaneous Value Measurement screen
will appear.
HORIBA