NAVI D-25 Instruction Manual page 109

3 Functions
3.4 Setting modes
● Printer connection and printing test [item No. 08]
When the printer
is not connected
or power is OFF.
Item No. 08
98
A printing test is conducted if a printer is connected.
1.
Press the ENTER key to start the printing test.
When conditions are normal, "End" is displayed.
When conditions are not normal, "Err" is displayed.
When the printer is connected and power is ON.
2.
Press the MODE key to return to the first item in
the maintenance modes, LCD check.
Test print format
HINT!
Entering the Maintenance mode
Measure-
Maintenance mode
ment mode
Item No.
selection
HORIBA