NAVI D-25 Instruction Manual page 61

2 Taking Measurements
2.8 Conductivity measurement (D-54)
● Electrode preparation
● Entering the Conductivity Measurement mode
50
Refer to the electrode instruction manual and make sure
you have the correct electrode.
1.
Remove the electrode protective cap from the
electrode.
2.
Immerse the electrode in pure (de-ionized)
water.
3.
Select the Conductivity Measurement mode
when the pH Instantaneous Value Measurement
screen is displayed by pressing the MODE key.
The Conductivity Instantaneous Value
Measurement screen will appear.
HORIBA