NAVI D-25 Instruction Manual page 118

● Dissolved Oxygen Measurement mode designation
command format (D-55 )
● Start measurement command format
D-52/53/54/55
Command code (Dissolved Oxygen Measurement
mode designation)
Header
・ This command is always valid when on-line.
・ The
meter
Instantaneous Value display.
・ If this command is sent to D-53 or 54 produces ER,2
(operational error).
Channel number (1 or 2)
Command code (Start measurement)
Header
・ When
the
Measurement, Auto Hold Measurement will start.
・ If the command is issued during a measurement hold
or during calibration, the meter will return to the initial
screeen status.
4 RS-232C communications
4.3 On-line operation commands
enters the
meter status
Dissolved Oxygen
is Instantaneous
107