Supermicro SuperServer 6049P-E1CR45H User Manual page 58

SuperStorage Server 6049P-E1CR45H/L/L+ User's Manual
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened. Refer to
the table below for pin definitions.
SATA Power Connectors
The SATA power connectors at JSD1 and JSD2 provide 5V power to onboard SATA devices.
Refer to the table below for pin definitions.
I-SATA 3.0 and S-SATA 3.0 Ports
The X11DSC+ has eight I-SATA 3.0 ports (I-SATA0-3, I-SATA4-7) and six S-SATA ports
(S-SATA0-3, S-SATA4, S-SATA5) on the motherboard. The I-SATA ports are supported by
the Intel PCH C621 chipset, and the S-SATA ports are supported by Intel SCU. S-SATA4/S-
SATA5 can be used with Supermicro SuperDOMs which are yellow SATA DOM connectors
with power pins built in, and do not require external power cables.
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
SATA Power
Pin Definitions
Pin# Definition
1 5V
2 Ground
3 Ground
SATA 3.0 Port
Pin Definitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
58