Supermicro SuperServer 6049P-E1CR45H User Manual page 36

SuperStorageServer 6049P-E1CR45H/L/L+ User's Manual
Installing NVMe Drives and Carriers into the Storage Chassis
4. Grasp the drive carrier handle.
5. Push the hard drive carrier into the hard drive bay until it clicks into the locked position.
Removing NVMe Drives and Carriers from the NVMe Drive Cage
1. Push the release button on the drive carrier. This will extend the drive carrier handle.
1. Grasp the drive carrier handle and pull the carrier up and out of the NVMe cage.
Warning: Enterprise level hard disk drives are recommended for use in Supermicro storage
chassis and servers. For information on recommended HDDs, visit the Supermicro website at
www.supermicro.com.
Figure 3-4. Logical Numbering of Hard Drive Layout
Drive #s 0-5 (left to right)
Drive #s 45-59 (left to right)
Drive #s 30-44 (left to right)
Drive #s 15-29 (left to right)
Drive #s 0-14 (left to right)
36