Table of Contents
Advertisement
Removing the Dual Fan Housing
The housing should be removed to install PCI expansion cards. Remove the two thumb
screws and pull the housing.
Thumb Screws
Figure 3-12. Removing the Dual Fan Housing
Checking the Server Air Flow
•
Make sure there are no objects to obstruct airflow in and out of the server.
•
Do not operate the server for long without drive carriers in the drive bays.
•
Use only recommended server parts.
•
Make sure no wires or foreign objects obstruct air flow through the chassis. Pull all excess
cabling out of the airflow path or use shorter cables.
The control panel LEDs display system heat status. See "Control Panel" in Chapter 1 for
details.
Chapter 3: Maintenance and Component Installation
49
Advertisement
Table of Contents
