Receiving; Safety Information - Lenze SM004S Operating Instructions Manual

1.4

Receiving

Inspect all cartons for damage which may have occurred during shipping. Carefully unpack equipment
and inspect thoroughly for damage or shortage. Report any damage to carrier and/or shortages to
supplier. All major components and connections should be examined for damage and tightness, with
special attention given to PC boards, plugs, knobs and switches.
1.5

Safety Information

Some parts of AC Tech controllers can be electrically live and some surfaces can be hot. Non-authorized
removal of the required cover, inappropriate use, and incorrect installation or operation creates the
risk of severe injury to personnel or damage to equipment. All operations concerning transport,
installation, and commissioning as well as maintenance must be carried out by qualified, skilled
personnel familiar with the installation, assembly, commissioning, and operation of variable frequency
drives and the application in which the drive is used.
All safety information given in these Operating Instructions has the same layout:
Signal Word! (characterizes the severity of the danger)
Note (describes the danger and informs on how to proceed)
Icon
Warning of
hazardous
electrical
voltage
Warning of a
general danger
Warning of
damage to
equipment
Information
INSTALLATION
Ensure proper handling and avoid excessive mechanical stress. Do not bend any components and
do not change any insulation distances during transport, handling, installation or maintenance.
Do not touch any electronic components or contacts. This drive contains electrostatically sensitive
components, which can easily be damaged by inappropriate handling. Static control precautions
must be adhered to during installation, testing, servicing and repairing of this drive and associated
options. Component damage may result if proper procedures are not followed.
The drive is considered a component for integration into a machine or process. It is neither a machine
nor a device ready for use in accordance with European directives (reference machinery directive and
electromagnetic compatibility directive). It is the responsibility of the end user to ensure that the
Lenze 13466147 EDBSM01 v19 EN
Signal Words
DANGER! Warns of impending danger.
Consequences if disregarded:
Death or severe injuries.
WARNING! Warns of potential, very hazardous situations.
Consequences if disregarded:
Death or severe injuries.
STOP! Warns of potential damage to material and equipment.
Consequences if disregarded:
Damage to the controller/drive or its environment.
Note Designates a general, useful note.
If you observe it, handling the controller/drive system is
made easier.
Safety Information 1
5