3.1.2 Turning off the power supply
(1) Execute any of the following operations:
•
Terminate any application software currently running.
•
Press and hold the [PWR] key (for about 3 seconds) until the power supply has turned off,
if the application software is not starting.
Ø The power supply is turned off.
Perform the operation (2) continuously if the power supply is not turned off after
terminating the application software.
(2) Execute any of the following operations if the power supply is not turned off even by executing
the operation (1):
•
Tap on the [Power Off] button if the [Reconnect to the Terminal Server] window is
displayed.
•
Press and hold the [PWR] key (for about 3 seconds) until the power supply is turned off if
the [Reconnect to the Terminal Server] window is not displayed.
Ø The power supply is turned off.
27