Initial Start-Up; Connecting The Power Adapter - Fujitsu Pocket LOOX 600 Easy Manual

Initial start-up

1 = Stylus
2 = Slot for expansion cards (CF Type I and II)
3 = Connector for headphones
4 = Soft reset (warm start)
5 = Notches for mounting the expansion
modules
6 = Connection for ActiveSync cable
7 = DC jack (DC IN)
8 = Cradle
9 = Record button for sound recordings
10 = Sliding switch for BLUETOOTH
11 = Light sensor
12 = LED for power-on indicator
13 = Suspend button
14 = Tasks
Initial start-up
Only a few steps are necessary to put your new Pocket PC into operation for the first time:
-

Connecting the power adapter

- Removing stylus from Pocket PC
- Carry out the initial start-up
You will learn more about the individual steps in the following sections.
Connecting the power adapter
You can connect the power adapter directly to the Pocket PC at the DC socket.
In the following text the letters after the designations for the various cables refer to the
i
illustration Delivery scope in your "Getting Started" manual fold-out cover page). Please
look there if you're not sure which cable is meant.
For information on how to connect the power adapter to the cradle, please read the chapter "Using
the cradle".
Ê
Connect the power adapter cable (C) to the DC socket of the Pocket PC (25).
Ê
Connect the power cable (B) into the power adapter (C).
Ê
Plug the power cable (B) into a mains outlet.
A26391-K120-Z120-3-7619
Operating Pocket LOOX 600
15 = Microphone opening
16 = Today
17 = Navigation key
18 = Contacts
19 = Calendar
20 = Slot for expansion cards (SD/MMC)
21 = FSC Speed button
22 = Scroll button
23 = Infrared interface (IrDA)
24 = Loudspeakers
25 = DC jack (DC IN)
26 = Connection for ActiveSync cable and for
cradle
27 = Connection for expansion modules
28 = Switch for initial start-up and General
Reset
13