Fujitsu TeamPad PBT7500-16 Operation Manual page 2

Regulatory Document
The following additional items will be added to the TeamPad 7510 Quick Reference guide at time of release.
1. FCC RF Exposure Guidelines:
To satisfy FCC RF exposure compliance requirements for a mobile transmitting
device, this device should be used in hand-held, hand-operated configurations only.
The device and its antenna should generally maintain a separation distance of 20 cm
or more from a person's body. This device is designed to be used in a person's hands
and it's operating configurations, generally do not support normal transmissions
while it is carried in pockets or holsters next to a person's body.
2. RF Devices Caution Statement / Present Certification Information
This device has been properly certified to be used with the the following RF card(s):
1. Cisco {Part:AIR-LMC352}, {FCC ID: LDK102040}, {Canada: 246 1103 2079A}.
Any changes or modifications to Fujitsu's equipment not expressly approved by
Fujitsu could void the user's authority to operate the equipment per FCC regulations.
3. Installation / Servicing Procedures
Only authorized Fujitsu integrators are permitted to install and service the RF
devices within this unit.
4. Operating Distance
This device shall be used at a distance of more than 20cm or approximately 8"
away from the body to allow for the best viewing angle for reading the display and
also operating the device.
TeamPad 7510
Quick Reference Guide Regulatory Additions
WARNING: FCC Exposure Guidelines
ISSUE: 1.1
Page 1 of 1