Enter The Settings For The Terminal Server/Power Saving - Fujitsu TeamPad PBT7500-16 Operation Manual

Ø Close the [WTS connection wizard] window, and display the [Setting the Terminal
Server/Power Saving] window.
Ö This is the end of operation to set connection the server.
Refer back to "2.3 Enter the Settings for the Terminal Server/Power Saving" for more
information on this process.

2.3 Enter the Settings for the Terminal Server/Power Saving

>>Reference>> "3.8 Using the Screen Keyboard" for more information about the screen
(1) Tap on the [Power saving] tab on the [Power savings and connecting to Terminal Server]
window.
(2) Set the following with the [Power savings] tab:
•
[Default brightness of back light]
Select the brightness of the back light when the power supply of this unit is turned on, from the
list box.
•
[Auto back light off timer]
Select the time between the no-operation time and the automatic set to the darkest setting of
this unit from the list box. Select [Inhibit] if the back light is not set to the darkest setting
automatically.
•
[Auto power off timer]
Select the time between the no-operation time and the automatic power-off of this unit from the
list box. Select [Inhibit] if the power supply of this unit is set to not automatically turn off.
•
[Battery low message]
Click off the check box to display the message when the residual battery capacity has reached a
low amount.
keyboard
23