Mitsubishi PKH-1.6GKLH Technical & Service Manual page 58

OPERATION PROCEDURE
9. REMOVING THE FAN MOTOR
(1) Remove the terminal block cover.
(2) Remove the front panel. (See Photo 1)
() Remove the electrical box. (See Photo 8)
() Remove the nozzle assembly. (See Photo 7)
() Remove the fan motor leg fixing  screws.
(6) Unscrew the set screws using by alankey and remove it by
sliding the fan motor to right.
(7) Remove the  screws and remove the motor cover from the
fan motor leg.
10. REMOVING THE LINE FLOW FAN
(1) Remove the terminal block cover.
(2) Remove the front panel. (See Photo 1)
() Remove the electrical box. (See Photo 8)
() Remove the nozzle assembly. (See Photo 7)
() Remove the fan motor. (See Photo 9)
(6) Remove the pipe fixture with 2 screws. (See Photo 12)
(7) Remove the left/right screws of the heat exchanger and
pull the left-hand side up.
(8) Remove the 2 screws by sliding it toward you remove the
fixture (fixing bearing).
w When the fan is hard to remove, remove the fan motor
first.
w When resetting the fan to the fan motor, locate and fix the
shaft after installing the fan.
11. REMOVING THE HEAT EXCHANGER
(1) Remove the terminal block cover.
(2) Remove the front panel. (See Photo 1)
() Remove the electrical box. (See Photo 8)
() Remove the corner box.
() Remove the nozzle assembly. (See Photo 7)
(6) Remove the 2 screws and the pipe fixture.
(7) Remove the 2 screws and heat exchanger.
12. REMOVING ELECTRICAL HEATER (PKH-1.6/2GKLH only)
(1) Remove the terminal block cover.
(2) Disconnect the connector <yellow> for the wireless remote
controller.
() Remove the front panel. (See Photo 1)
() Remove the electrical box. (See Photo 8)
() Remove the nozzle assembly. (See Photo 7)
(6) Remove the heat exchanger. (See Photo 12)
(7) Remove the 2 screws and electrical heater.
OC229A
PHOTOS & ILLUSTRATION
(Photo 9)
Set
screw
(Photo 10)
Motor cover
Fan motor
(Photo 11)
Heat exchanger
Set screws
Fixture (fixing bearing)
(Photo 12)
Set screw
Pipe fixture
(Photo 13)
Set screws
Electrical heater
8
Motor cover
Fan motor
Screws
Motor leg
Heat exchanger
Set screws