Mitsubishi PKH-1.6GKLH Technical & Service Manual page 3

● Wireless remote controller
● When cover is open.
display
Lights up while transmission to the indoor unit
is mode using switches.
display
OPERATION MODE display
Operation mode display indicates which
operation mode is in effect.
display
FUNCTION
Lights up when function are set.
display
TEST RUN CHECK
CHECK&TEST RUN display indicates that the
unit is being checked or test-run.
display
Displays when batteries are dead.
display
The vertical direction of airflow is indicated.
display
FAN SPEED display indicates which fan speed
has been selected.
display
The unit is turned ON and OFF alternately
each time the button is pressed.
● When cover is open.
MODE SELECT button
Used to switch the operation mode between
cooling, drying, blowing, heating and auto
mode.
FAN SPEED SELECT button
Used to change the fan speed.
VANE CONTROL button
Used to change the airflow direction.
OC229A
ADDRESS display
Displays the refrigerant address.
UNIT NO. display
Displays the number of unit.
FUNCTION NO. display
Displays the mode.
SELECTION NO. display
Displays the selection number.
ADDRESS
UNIT No.
FUNCTION No.
°C
SELECTION No.
AM
PM
FUNCTION
AM
TEST RUN
PM
CHECK
TEMP.
ON/OFF
START
MODE FAN
STOP
VANE
HR.
MIN.
RESET
TEMP.
ON/OFF
START
MODE FAN
STOP
VANE
HR.
MIN.
RESET
 
display
SET TEMP. display indicates desired tempera-
ture set.
CLOCK display
Displays the current time.
" "display
Flashes when the current time is displayed.
TIMER display
Displays when in timer operation or when set-
ting timer.
" " " " display
Displays the order of timer operation.
" " " " display
Displays whether timer is on or off.
▼
" " " " display
Displays when the current time and the timer
time can be changed.
TEMP. button
SET TEMPERATURE button sets any desired
room temperature.
TIMER CONTROL buttons
STOP (OFF timer): when this switch is set, the
air conditioner will be automatically stopped at
the preset time.
START (ON timer): when this switch is set, the
air conditioner will be automatically started at
the preset time.
HR. and MIN.buttons
Buttons used to set the "hour and minute" of
the current time and timer settings.
button
RESET button