Sp400X Components - HandHeld SP400X Series System Administrator Manual

SP400X components

The Handheld SP400X is designed to be worn comfortably on the hand and arm when performing scanning, printing, and package handling
tasks.
The SP400X consists of the following key components:
• A battery
• Installed inside a forearm-mounted wrist case; or
• Installed into the bottom of a handle accessory
• The scanner printer device
• Attached to a hand mount; or
• Attached to a handle accessory
IMPORTANT: If you are using the handle accessory instead of the hand mount, see the instructions that were included with the handle
accessory.
1. Battery inside wrist case
2. Control panel
3. SP400X
4. Hand mount
SP400X Series - 1. Introduction
7