Install The Print Cartridge - HandHeld SP400X Series System Administrator Manual

Install the print cartridge

1. Turn off the SP400X by pressing and holding the green Power button for three seconds if it is not already off.
IMPORTANT:
Always turn the SP400X off before installing a print cartridge.
2. Remove the protective tape from the print cartridge by pulling it straight out.
1. Metal contacts
2. Ink nozzles
IMPORTANT:
Hold the print cartridge by its sides, as shown above. Do not touch the metal contacts or the ink nozzles.
3. Push the side button to release the door, and swing the door open.
1. Door
SP400X Series - 3. Set up the SP400X
12