HandHeld SP400X Series System Administrator Manual page 40

fIgURE 9-5 Problems printing correctly
Problem Cause
The print smears after The ink is not dry.
printing.
The ink is not dry due to stacking or contact
with other objects.
Print rubs off The printing was done on a non-porous
material.
SP400X Series - 9. Troubleshoot problems and get support
solution
• Allow more time for the ink to dry.
• Try to avoid printing on surfaces that take longer to dry,
such as plastic sleeves, tape, etc.
• Increase air flow in the area.
• Make sure the printed surface is dry.
• Increase the temperature in the area.
• Lower the humidity of the area
• Change to Fast Dry template.
Allow the ink to dry before placing printed materials on top
of or next to each other.
Allow the ink to dry before placing the printed area in
contact with other objects.
40